spec no: dsa b4799 rev no: v.7 date: mar/14/2005 page: 1 of 4 approved: j. lu checked: allen liu drawn: w.j.zhu package dimension s kpc - 3216cgck green description the green source color devices are made with ingaalp on gaas substrate light emitting diode . 3.2x1.6mm smd chip led lamp features 3.2x1.6mm smt led, 1.1mm thickness. low power consumption. wide viewing angle. ideal for backlight and indicator. various colors and lens types available. package: 2000pcs / reel . notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0 .2(0.008") unless otherwise noted. 3.specifications are subject to change without notice.
spec no: dsa b4799 rev no: v.7 date: mar/14/2005 page: 2 of 4 approved: j. lu checked: allen liu drawn: w.j.zhu selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 ? 1/2 kpc - 3216cgck green (ingaaip) water clear 10 40 120 symbol parameter device typ. max. test conditions units peak peak wavelength green 574 nm i f =20ma d dominant wavelength green 570 nm i f =20ma ? 1/2 spectral line half - width green 20 nm i f =20ma c capacitance green 15 pf v f =0v;f=1mhz v f forward voltage green 2.1 2.5 v i f =20ma i r reverse current green 10 ua v r = 5v parameter green units power dissipation 105 mw dc forward current 30 ma peak forward current [1] 150 ma reverse voltage 5 v operating/storage temperature - 40c to +85c
spec no: dsa b4799 rev no: v.7 date: mar/14/2005 page: 3 of 4 approved: j. lu checked: allen liu drawn: w.j.zhu green kpc - 3216cgck
spec no: dsa b4799 rev no: v.7 date: mar/14/2005 page: 4 of 4 approved: j. lu checked: allen liu drawn: w.j.zhu recommended soldering pattern (units : mm ) tape specifications (units : mm ) kpc - 3216cgck smt reflow soldering instruction s number of reflow process shall be 2 times or less and cooling process to normal temperature is required between first and second soldering process. remarks: if special sorting is required (e.g. binning based on forward voltage,luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|